压槽滚筒设备在食品行业傍边运用广泛,首要是依托电动机的股动皮带的的作业进行运送物料.流水线设备可以进行因地制宜的进行选用直线、弯道、斜坡等线体方法.压槽滚筒设备有着运送间隔远,结构简略易于维护,可以十分便利的实行程序化和主动操作,运用运送带的连续或是间歇运动来运送100KG以下的物品或是粉状、颗粒物品有着作业高速、噪音低,而且可以进行上运送物料.皮带是压槽滚筒设备的首要承载物料部件,在经过长时间的作业压槽滚筒设备也需求恰当的维护和维护,特别在压槽滚筒设备休憩时的存储也是至关的主要.
Grooving roller equipment is widely used in the food industry. The first thing is to rely on the operation of the motor's moving belt to transport materials. The assembly line equipment can be adapted to local conditions to select straight lines, curves, slopes and other line methods. Grooving roller equipment has The transportation interval is long, the structure is simple and easy to maintain, and it can be programmed and actively operated very conveniently. The continuous or intermittent movement of the conveyor belt is used to transport items under 100KG or powdery and granular items with high speed and low noise. The material can be transported on the belt. The belt is the primary material-carrying component of the grooved roller equipment. After a long period of operation, the grooved roller equipment also needs proper maintenance and maintenance, especially when the grooved roller equipment is resting. The storage is also crucial main.
压槽滚筒设备在经过长时间运送皮带想要得到较好的维护有必要遵从如下几点:首要压槽滚筒设备配件的皮带和带轮应当要进行坚持洁净不得沾有油和水.皮带进行设备时,应当检查下传动系统,传动轴与传动轮是不是垂直,传动轴之间仍是不是平行,传动轮是不是在一平面上,假设不是还需求进行校正.防止发生压槽滚筒设备在进行作业时,出现跑偏表象.压槽滚筒设备由于可以运送多种物料,如有油脂的物料切无粘到皮带上.皮带设备时东西或是外力切勿直接施于皮带上.其他压槽滚筒设备在运送物料时,皮带的运用温度规划为负四十度至一百二十度,超越此规划对皮带危害大.
The grooved roller equipment needs to be well maintained after a long period of time to transport the belt. It is necessary to comply with the following points: The belts and pulleys of the main grooved roller equipment accessories should be kept clean and free from oil and water. At the time, check the transmission system, whether the transmission shaft and the transmission wheel are perpendicular, whether the transmission shafts are still parallel, whether the transmission wheel is on a flat surface, and it is assumed that correction is not required. To prevent the occurrence of grooved roller equipment During operation, there is the appearance of deviation. The grooved roller equipment can transport a variety of materials, such as greased materials without sticking to the belt. Do not apply anything or external force directly to the belt during the belt equipment. Other grooved rollers When the equipment is transporting materials, the operating temperature of the belt is planned to be minus 40 degrees to 120 degrees.Exceeding this plan is very harmful to the belt.
皮带的贮存也是许多出产厂家所担忧的疑问,贮存不当就得为压槽滚筒设备更换新皮带一来增加运送设备的出产本钱,二来需求进行旧新的更换及空车运载调试运送直接影响着出产公司的运送功率,所以皮带的贮存也是许多出产公司所关心的主要疑问,作为压槽滚筒设备的专业出产厂家就为咱们介绍下压槽滚筒设备的皮带贮存方法.
The storage of belts is also a question that many manufacturers worry about. Improper storage requires replacement of new belts for the grooved roller equipment. One is to increase the production cost of the transportation equipment. Second, the need to replace the old and the new and the empty vehicle transportation debugging directly affects the transportation. The transportation power of the production company, so the storage of the belt is also the main concern of many production companies.As a professional manufacturer of grooved roller equipment, we will introduce the belt storage method of the lower grooved roller equipment.
皮带在进行贮存和运送物料期间,必定是经过了一段时间的物料运送,要进行尽量防止皮带承受过大的分量而变形,防止机械危害,不得过于弯曲和揉捏.皮带在贮存期间还应防止阳光直射或是雨雪浸淋,坚持清洗,防止与酸碱油类有机溶剂等影响橡胶质量的物质触摸.贮存时仓库温度坚持在负十五度至四十度之间,相对湿度坚持在百分之五十至百分之八十之间.
During the storage and transportation of materials, the belt must be transported for a period of time. It is necessary to prevent the belt from being deformed due to excessive weight, prevent mechanical hazards, and not be too bent and kneaded. The belt should also be prevented during storage. Direct sunlight or immersion in rain and snow, insist on cleaning to prevent contact with substances that affect the quality of rubber such as acid, alkali, oil and organic solvents. During storage, the warehouse temperature is maintained at minus 15 to 40 degrees, and the relative humidity is maintained at 100 Between 50% and 80%.
以上内容由温岭市华宇生产流水线制造厂整理提供。华宇生产流水线是一家专业生产、设计、安装、调试、运输、维护为一体的流水线设备企业。建厂26年来，凭着先进的现代化生产管理体系，产品不断创新，制造出成套悬挂物件输送线，各类皮带式输送线、涂装线、板链线、整机线、清洗线、自动化组合装配生产设备，仓储等产品系列。产品广泛应用于汽车、摩托车、电动自行车及配件、清洗机、汽油机、缝糿机、电机、仪器仪表、家用电器、电脑、彩电、空调器、电冰箱、洗衣机、炊具、节能机、化妆品、通信、交通、水泵、食品塑料制品等电子行业各种装配生产,为企业生产提高效率，降低人力成本。热忱欢迎新老客户来厂参观、洽谈合作！
The above content is organized and provided by Wenling Huayu Production Line Manufacturing Plant. Huayu production line is a professional production, design, installation, commissioning, transportation and maintenance line equipment enterprise. Since the establishment of the factory 26 years ago, with the advanced modern production management system and continuous product innovation, a complete set of suspended object conveyor lines, various belt conveyor lines, coating lines, plate chain lines, complete machine lines, cleaning lines, and automated combinations have been manufactured Assemble production equipment, storage and other product series. Products are widely used in automobiles, motorcycles, electric bicycles and accessories, washing machines, gasoline engines, sewing machines, motors, instruments, household appliances, computers, color TVs, air conditioners, refrigerators, washing machines, cooking utensils, energy-saving machines, cosmetics, Various assembly and production of electronic industries such as communications, transportation, water pumps, food plastic products, etc., improve production efficiency and reduce labor costs for enterprises. Warmly welcome new and old customers to visit the factory and discuss cooperation!
