流水线：巴氏杀菌机,巴氏杀菌流水线既采用巴氏杀菌法，对各类包装产品蔬菜、果蔬、鲜奶、罐装食品通过温度自动调节，将杀菌槽中的热水温度控制在80-90摄氏度之间，即能起到杀菌效果，又能保证蛋白质等营养成份不在较大温度范围内波动，保持食品原有的品质，达到对食品不加防腐剂和添加剂，而延长保质期，从而保护了人们的生命健康。同时对杀菌后的物品通过能却水进行冷却并用强风将包装物表面吹干后包装入库可延长食品储藏期。
Assembly line: pasteurization machine, pasteurization assembly line adopts pasteurization method to automatically adjust the temperature of various packaged products vegetables, fruits and vegetables, fresh milk, canned food, and control the temperature of hot water in the sterilization tank at 80- Between 90 degrees Celsius, it can not only achieve the sterilization effect, but also ensure that the nutritional ingredients such as protein do not fluctuate within a large temperature range, maintain the original quality of the food, and achieve no preservatives and additives to the food, and extend the shelf life, thereby protecting To improve people’s lives and health. At the same time, the sterilized items are cooled by energizing water and the surface of the package is blown dry with strong wind, and then packaged and stored in the warehouse to extend the food storage period.
巴氏杀菌机,巴氏杀菌流水线结构组成：
Pasteurization machine, pasteurization line structure composition:
巴氏杀菌机有杀菌机及电控部分组成，通过电器控制实验自动化连续式生产，分两种规格形式：
The pasteurization machine is composed of a sterilization machine and an electronic control part. It is automatically and continuously produced through electrical control experiments. It is divided into two specifications:
1、标准控制型：采用蒸汽电磁阀与温度传感器联动控制。
1. Standard control type: use steam solenoid valve and temperature sensor linkage control.
2、电脑全动控制型：采用电脑触摸屏与PLC自动执行进行控制。
2. Computer control type: computer touch screen and PLC automatic execution control.
巴氏杀菌机,巴氏杀菌流水线产品优势特点：
Advantages of pasteurization machine, pasteurization production line:
1、采用全优质SUS304不锈钢制成设备安全、卫生。
1. The equipment is made of high-quality SUS304 stainless steel for safety and hygiene.
2、采用巴氏杀菌法能保持原有品质，保质期长。
2. Pasteurization can maintain the original quality and have a long shelf life.
3、采用自动温控，变频器调速，自动化流水线程度高，劳动强度低可选配电脑全自动控制系统。
3. It adopts automatic temperature control, frequency converter speed regulation, high degree of automatic assembly line, low labor intensity, and optional computer automatic control system.
4、设备使用，维护方便，外形美观。
4. The equipment is easy to use, easy to maintain and beautiful in appearance.
巴氏杀菌机,巴氏杀菌流水线使用说明书：
Instructions for pasteurization machine, pasteurization assembly line:
1、接通电源，该设备为三相四线，其中一根双色线为零线（请专业人员进行连接线作业，以防对设备造成损害）。
1. Turn on the power, the device is three-phase four-wire, and one of the two-color wires is the neutral wire (professionals are required to connect the wires to prevent damage to the device).
2、打开电源开关，设定温度设定温度过程为按SET，按右键调适需要调整的位数，按上下键设定具体的数值，设定好后在按一次SET键确认。
2. Turn on the power switch and set the temperature. The temperature setting process is to press SET, press the right button to adjust the number of digits to be adjusted, and press the up and down keys to set the specific value. After setting, press the SET button to confirm.
3、打开杀菌开关，设备开始升温，温度升到设定值后自动停止，在工作过程中温度下降升温自动工作。
3. When the sterilization switch is turned on, the equipment starts to heat up, and it stops automatically when the temperature rises to the set value. During the working process, the temperature drops and the temperature rises automatically.
4、温度升到设定值后，打开网带开始运行，进行杀菌。
4. After the temperature rises to the set value, turn on the mesh belt and start running for sterilization.
5、网带运行速度用电器箱内部的变频器进行调整，旋钮顺时针旋转为提高速度，反之速度降低。
5. The running speed of the mesh belt is adjusted with the frequency converter inside the electrical box, the knob is turned clockwise to increase the speed, otherwise the speed is reduced.
巴氏杀菌机,巴氏杀菌流水线使用注意事项：
Precautions for use of pasteurization machine and pasteurization line:
1、每天工作结束后，应对设备进行清洗。
1. The equipment should be cleaned after work every day.
2、每月应检查减速机油位及油质，必要时进行加油或换油作业所用油为32号汽机油。
2. The oil level and oil quality of the reducer should be checked every month. If necessary, the oil used for refueling or oil change operations is No. 32 steam engine oil.
3、设备移动及重新接线时，应确认电机的转向，如反转则将三相电中的两相任意两相倒换。
3. When the equipment is moved and re-wired, the rotation direction of the motor should be confirmed. If it is reversed, any two phases of the three-phase power should be switched.
4、电器系统非专业人员禁止开箱。
4. Non-professionals in the electrical system are prohibited from opening the box.
以上内容由温岭市华宇生产流水线制造厂整理提供。华宇生产流水线是一家专业生产、设计、安装、调试、运输、维护为一体的流水线设备企业。建厂27年来，凭着先进的现代化生产管理体系，产品不断创新，制造出成套悬挂物件输送线，各类皮带式输送线、涂装线、板链线、整机线、清洗线、自动化组合装配生产设备，仓储等产品系列。产品广泛应用于汽车、摩托车、电动自行车及配件、清洗机、汽油机、缝糿机、电机、仪器仪表、家用电器、电脑、彩电、空调器、电冰箱、洗衣机、炊具、节能机、化妆品、通信、交通、水泵、食品塑料制品等电子行业各种装配生产,为企业生产提高效率，降低人力成本。热忱欢迎新老客户来厂参观、洽谈合作！
The above content is organized and provided by Wenling Huayu Production Line Manufacturing Plant. Huayu production line is a professional production, design, installation, commissioning, transportation and maintenance line equipment enterprise. Since the establishment of the factory 26 years ago, with the advanced modern production management system and continuous product innovation, a complete set of suspended object conveyor lines, various belt conveyor lines, coating lines, plate chain lines, complete machine lines, cleaning lines, and automated combinations have been manufactured Assemble production equipment, storage and other product series. Products are widely used in automobiles, motorcycles, electric bicycles and accessories, washing machines, gasoline engines, sewing machines, motors, instruments, household appliances, computers, color TVs, air conditioners, refrigerators, washing machines, cooking utensils, energy-saving machines, cosmetics, Various assembly and production of electronic industries such as communications, transportation, water pumps, food plastic products, etc., improve production efficiency and reduce labor costs for enterprises. Warmly welcome new and old customers to visit the factory and discuss cooperation!
